Step1: Take out the following 7PCS accessories.

  1. 1PC*DMX512 Transmitter Box
  2. 1PC*Antenna
  3. 1PC*6V1A DC Charger
  4. 1PC*DMX Connect Cable
  5. 1PC*USB-DMX512 Box
  6. 1PC*USB Connector
  7. 1PC USB Cabel

Note: NO. 1-4 is a standard set of GF DMX512 transmitters;

NO. 4-7 add laptop control software is a standard driver kit if you need control with the DMX512 laptop control system. This kit, can either be ordered from a similar driver as an alternative. For the USB DMX512 Box, you can buy it from ENTTEC.

DMX512 Using Step1
DMX512 Using Step2

Step2:

Assemble the antenna.

Step3:

Connect the DMX cable to the DMX512 port of the transmitter.

DMX512 Using Step3
DMX512 Using Step4

Step4:

Connect the other end of the DMX512 cable to the USB -DMX.

Step5: 

Connect the USB cable to the USB-DMX512 box.

Connect the other end of the USB cable to the USB port of the laptop.

DMX512 Using Step5
DMX512 Using Step6

Step6: 

Connect the DC charger.

Step7:

Connect power.

DMX512 Using Step7
DMX512 Using Step8

Step8:

Switch on the LED Wristbands or any other DMX512 Lightups.